Tag and Marking
2016/11/12 view:
The tag is riveted on the outside of the outer ring, or the inside of the inner ring, stating the type, manufacture number etc. (for two-ring type, the tag is near the filler plug).
|
·Marking --The soft zone of the raceway hard‑ ening must be located in the area where there are no loads or less loads, we marked "s" outside ac-cordingly and where the plug is. |
|
-Three teeth (with green decorating) have the maximum runout of the pitch circle. It should be here to adjust the backlash between the meshing gears.
- Pre：None
- Next：reason why 2016/9/10